Biomass pellet making machine is a kind of equipment used to make biomass materials like sawdust, stalk, etc. into cylindrical pellets. The diameter of pellets is usually 6-8mm.
2. What models of biomass pellet machine are there?
We have 2 models of biomass pellet machines: PM42 and PM580
3. What is the capacity of PM42 pellet machine?
If calculated by hour, the capacity is 0.9-1.3 ton per hour for 6mm pellets, while 1-1.5 ton per hour for 8mm pellets.
4. What are the main wearing parts of biomass pelleting machines and how long is their service life?
The main wearing parts are ring die, roller, bearing, etc. The service life of ring die is about 800 hours. The life span of ring die varies by different raw materials.
5. What are the ring die and roller made from? What advantages do they have?
The ring die and roller are Cr20 alloy steel forged by finish machining, and adopts carburizing heat treatment. The carburizing layer can be up to 2mm, and the abrasion resistance is ten times more than that of common heat treatment, thus maximizing production cost savings.
6. If I do not have enough money to buy a complete set of biomass pelletizing plant, can I produce biomass pellets?
Surely you can. You can buy only a set of pelletizer, or with some auxiliary equipments like elevator, cooler, etc. so as to save a lot of investment. See more about custome desgin pellet mill plans.
7. Does the biomass pelletizing machine have special requirements for raw materials?
Biomass pelletizer machine is suitable to process various kinds of raw materials. because of the differences of raw materials, the compression ratio of ring die for them are different to reach the best pelletizing result.
8. How to judge a good biomass pelleting machine?
Biomass pelleting machine is a new type of equipment in China, so there is almost no mature product in the market. However, our equipments are able to work 24hours a day. Our biomass pelleting machines also have the following characteristics:
- Can work continually with low fault rate
- The power consumption for producing 1 ton pellets is lower than 50-65 kWh (based on 6mm diameter pellets)
- The pellet machine does not damage the physical status of wood sawdust in pelleting process, and the color of pellets doesn’t change
- The smoothness of pellets; the density to be 1.1-1.3T/m3
Quick Message
